Payment & Shipping Terms:
|Operating Weight:||10-16 Ton||Transmission:||Hydrostatic|
|Tire Number:||F4+R5||Tire Size:||11.00-20|
|Rated Power:||130hp||Compacting Width:||2255mm|
heavy duty construction equipment,
commercial construction equipment
Building Construction Equipment
Rubber tyre roller is mainly suitable for compaction of various viscous and non-viscous materials in pavement engineering, such as sand, gravel, stabilized soil, asphalt concrete, dry and hard concrete, especially for final treatment of asphalt surface of high-grade highway. It is a high-performance compaction equipment for construction of high-grade highway, airport, municipal engineering and industrial sites.
Sionway pneumatic tire compactor is a special asphalt compactor typically utilized on hot mix asphalt pavement, but it's doing more than that including rolling surface treatments like chipping and seal, soil stabilization with modifiers such as asphalt emulsion, calcium chloride, fly ash, etc.
Sinoway pneumatic tire rollers are with three capacities, 10 to 16 ton rubber tire roller, 18 to 26 tons pneumatic rollers, 20 to 35 ton pneumatic tire compactor. Cummins engine provides sufficient power for altitude operation. The tire numbers are 9 or 11, which offer wider compacting width better performance.
Reliable and powerful Cummins engine with large power storage, reliable performance.
Top quality compaction is achieved by the kneading and rolling effect of the wheels as vertical pressure combined with horizontal forces produce an excellent, uniform surface finish.
On uneven surfaces, our patented Tire Suspension System, equipped with a tiltable front shaft, enables the 4 front wheels to swing up and down by +/- 8° achieving maximum ground contact for each wheel. This delivers optimum compact and improves safety by helping prevent the roller from tilting over.
Safety is further enhanced with a three-stage breaking system utilizing hydraulics, oil cut-off and wheel side oil breaking. This three stage system protects the operator, site workers and members of the public from accidents.
|Type||Four-cylinder,water-cooled turbocharged,mechanical injection|
|Travelling speed (km/h)|
|Forward/Reverse||0 - 13|
|Travelling pump||Sauer/Rexroth piston pump|
|Travelling motor||Sauer/Rexroth piston motor|
|Axle and Tyre|
|Type of main reducer||Spiral bevel gear|
|Final reducer||Chain driven|
|Chain gear ratio||1:2.17|
|Single tire load (F/R)||1778kg|
|Tyre number (F+R)||4+5|
|Main Technical Specification|
|Max. operating weight||16000Kg|
|Average ground pressure||0.15 - 0.3MPa|
|Tyre pressure||0.2 - 0.8MPa|
|Vertical oscillation||± 100mm|
|Steering cylinder||ɸ90 x 50 x 260mm|
|Min. steering radius||7500mm|
|Service brake||Hydraulic brake|
|Parking brake||Oil cut-off brake|
|Engine crank case||16L|
Contact Person: Lee