Payment & Shipping Terms:
|Tire Size:||29.5R29||Max. Grade Ability:||60%|
|Condition:||Brand New||Warranty:||One Year|
hydraulic truck crane,
rough terrain crane
Rough Terrain Compact Crane
A rough terrain crane has a boom mounted on an undercarriage atop four rubber tires that is designed for off-road pick-and-carry operations. Outriggers are used to level and stabilize the crane for hoisting.
These telescopic cranes are single-engine machines, with the same engine powering the undercarriage and the crane, similar to a crawler crane. The engine is usually mounted in the undercarriage rather than in the upper, as with crawler crane. Most have four wheel drive and four wheel steering for traversing tighter and slicker terrain than a standard truck crane, with less site prep
SINOWAY SWORC1000 off road crane adopts with two-axle loading chassis and has two types of driving model, four types of turning models and back-and-forward driving function. The product has four sections of quadrangular great circle main doom, H-type outrigger as well as combined self-removal and installation counterweight. It has three types of operation models such as operation with the support of outrigger, operation with the support of tire and hanging when driving. It is widely used in oil field, mine, road and bridge construction, warehousing base and other construction sites.
Three operating modes,superior performance of operation on outriggers, which is not less than that for truck crane in a stationary site; unique performance of operation on tires makes it easy to complete the job what truck crane could not finish when it is difficult to deploy outriggers in a confined site; powerful pick and carry capacity makes fast operation of lifting and transferring load. It is suitable for lifting and transferring operation in oil patch, storage, goods yard, dock and logistic base, etc.
Two driving modes: forward and reverse driving function contributes to fast transferring within a site or from a site to another; four electro-proportional steering modes combined with min. turning radius of 7.5m offers unmatched maneuver ability in a confined space. Specialized off-road tires and super power system ensure favorable off-road capacity, suitable for applications in various adverse sites.
Swing, rigidly lockable hydraulic suspension technology: the shock absorption function of rear suspension may be performed through the swing mechanism and suspension cylinder when driving on roads, consequently road shock is buffered and travel smoothness is improved; the rear suspension cylinder may be locked to rigid state so as to meet the requirement for travel with a load suspended; during operation of crane on tires, when the turntable is turned over ±3°, suspension system may automatically switch over to rigid state, operation safety is ensured.
Switchover of wheel turning direction: when the vehicle is driving while the turntable is turned over 90°, the control system will send a signal through the position sensor fitted on the turntable for controlling the hydraulic change valve between the steering wheel and the change cylinder of front axle. And then the vehicle drives in reverse direction, and the rotating direction of the steering wheel is the same as that for forward driving.
|Type||Six-cylinder,water-cooled electronic injection|
|Max. total rated lifting load||100t|
|Fully extended boom+jib||68.6m(two-section,angle 0°,30°)|
|Base boom max.load moment||3500kN.m|
|Min.rated working radius||3m|
|Boom elevating time||≤95s|
|Boom extending time||≤150s|
|Turning radius at swing table tail||4930mm|
|Lifting device||Axial piston hydraulic motor|
|Slewing device||Axial piston hydraulic motor|
|Hydraulic ram capacity||700L|
|Equipments and Structure|
|Boom profile||Five-section boom of octagon cross section|
|Jib profile||Two-section truss (inclination 0°,30°)|
|Boom extending device||Two-section telescopic cylinder and rope|
|Boom elevating device||Rear-mounted single cylinder elevation|
|Lifting device||Isolated main and auxiliary lifting devices,plantary reducer driven by hydraulic motor|
|Slewing device||Three-row roller slewing ring|
|Type||H-shaped hydraulic outrigger with an option of both hand and electric control|
|Outrigger span||8400×8200/6000mm (longitudinal+lateral)|
|Steel wire rope of main winch||Φ20~220m|
|Steel wire rope of auxiliary winch||Φ18~190m|
|Min.turning radius of jib nose||7.5m|
|Undercarriage and Structure|
|Steering mode||Independent front axle, steering,small truning radius,crab walk and independent rear axle steering|
|Suspension||Rigid front axle,swing rear axle,hydraulic locking cylinder,electric control|
|Service brake||Hydraulic dual circle,disc brake|
|Parking brake||Mechanical disc brake,hydraulic release|
|Fuel tank capacity||320L|
|Dimension and weight|
|Front axle weight||41710kg|
|Raer axle weight||35120kg|
Contact Person: Lee