Payment & Shipping Terms:
|Product Name:||Hydrocyclone The Compound Hydrocyclone Hydraulic Cyclone||Processing Capacity:||74~157m³/h|
|Partition Size:||42~105μm||Diameter Of Overflow Port:||90~135mm|
|Diameter Of Dust- Setting Nozzle:||30~70mm||Inlet Pressure:||0.06~0.15Mpa|
mineral processing machinery,
Mining Processing Equipment Hydrocyclone The Compound Hydrocyclone Hydraulic Cyclone
Hydrocyclone is a common classification beneficiation equipment, with unique structure design adopts the composite structure of multi section type column body. It changes the height of column according to the need. If the height increased, overflow fineness increase up to about 10 μm diameter. Each diameter has unique cylinder length and cone angle, which can achieve the maximum tangential velocity at the minimum total cyclone length, so as to increase centrifugal force and improve the classification efficiency.
Features and technology advantages
1.The way of involute feeding through the inlet branch reduces the turbulence of the burst emanative flow when materials entry, makes a smooth movement of liquid inside cyclone, therefore gives a sharp classification.
2.The rational length proportion of column and cone and reasonable insert depth of vortex finder.
3.Wear resistant rubber as liners prolongs the service life by 2-4 times.
The working principle of hydrocyclone is centrifugal sedimentation, when two phases or three phases mixed liquid is fed into hydrocyclone by a certain pressure liquid and produces strong three-dimensional-elliptic rotational movement. Due to the different density of particles, the centrifugal force, the centripetal buoyancy and drag force are different. So most coarse particles or heavy phase are discharged from cyclone underflow outlet, and the fine particles or light phase from the overflow tube, so as to achieve separation.
|Model||Spec.||Processing Capacity (m3/h)||Partition Size (μm)||Diameter of Overflow Port (mm)||Diameter of Dust- Setting Nozzle (mm)||Inlet Pressure (MPa)|
|XC II F150||150||10 ~23||25 ~74||30 ~50||8~22||0.06 ~0.15|
|XC II F 200||200||17 ~38||28 ~80||40 ~65||16 ~32|
|XC II F250||250||24 ~53||30 ~82||65~100||16 ~40|
|XC II F 300||300||40~100||36 ~90||65~120||20 ~40|
|XC II F 350||350||56~118||40~100||80~120||30 ~70|
|XC II F 375||375||74~157||42~105||90~135||30 ~70|
|XC II F 450||450||90~192||44~110||100~150||30 ~70|
|XC II F 500||500||128~300||50~115||130~220||35~100|
|XC II F 550||550||155~368||52~120||140~240||35~100|
|XC II F 600||600||200~468||57~125||160~260||65~110|
|XC II F 660||660||237~524||60~130||180~280||80~150|