Payment & Shipping Terms:
|Rated Power:||276kw||Drive Type:||8X4|
|Boom Type:||Telescopic||Max. Slewing Speed:||≤1.9r/min|
|Max. Travel Speed:||80km/h||Base Boom Max. Load Moment:||3000kN.m|
hydraulic truck crane,
rough terrain crane
Hydraulic Mobile Crane
Sinoway supply the truck crane with the lifting capacity ranging from 20ton to 130ton and provide complete technical support for customers. Truck crane is a crane mounted on a truck carrier which can provide better mobility. Truck cranes are able to travel on highways, eliminating the need for special equipment to transport the crane unless weight or other size constrictions are in place such as local laws.
SWTC80W truck crane has five-section boom of high strength steel structure and optimized U-shaped cross section with max.lifting capacity of 80t, full-extended boom length of 47m, max.lifting height including jib of 64m, reduce weight and improve safety significantly.
Jib mounting angles are 0°, 15°, and 30°, which ensure fast and convenient change-over between different operating conditions so as to improve working efficiency of the machine.
SINOWAY SWTC80W is a truck crane of full range slewing function, telescopic boom sections and pilot-operated proportional controlled systems. The crane adopts self-manufactured full-width 4-axle special purpose chassis (8×4 drive, offering convenient and flexible hydraulically powered steering), providing wide vision, spacious cab and luxurious equipment.
The latest directional control valve and tandem pump system ensure that each executive mechanism makes full use of its working capability. The easy-controlled, flexible, reliable and stepless speed regulated joysticks (L / R) can provide the crane with smooth simultaneous movements between “Spool winches up”, “Reel winches off”, “Derricking”,“Slewing” and “Telescope boom in / out”, which greatly improve the crane’s working efficiency. The safety devices such as relief valve, balance valve, hydraulic lock and brake valve fitted in hydraulic system prevent the accidents caused by oil line overload and oil pipe ruptures.
Hydraulic system load feedback and constant power control is applied to provide strong lifting capacity and good micro-mobility. Unique steering buffer design guarantees smooth braking operation.
The safety devices such as load moment limiter and the complete lighting systems ensure your safety during operation and are convenient for night work.
|Dead weight in travel state||49870kg|
|Front axle load||24000kg|
|Rear axle load||26000kg|
|Engine model||WP12.375N MC11.39-30|
|Engine rated output||276kw/1900rpm/290kw/1900rpm|
|Engine rated torque||1800N.m/(1000~1400)rpm/1900N.m/(1000~1400)rpm|
|Max. travel speed||80km/h|
|Min. turning diameter||24m|
|Min. ground clearance||371mm|
|Max. grade ability||40%|
|Fuel consumption of per 100km||≤45L|
|Max. total rated lifting load||80t|
|Min. rated working radius||3m|
|Turning radius at swing table tail||4670mm|
|Base boom max. load moment||3000kN.m|
|Outrigger longitudinal distance span||8.075|
|Outrigger lateral distance span||7.9m|
|Boom elevating Time||70s|
|Boom telescoping Time||150s|
|Max. slewing speed||≤1.9r/min|
|Main winch max. speed(no load)||130m/min|
|Auxiliary winch max. speed(no load)||110m/min|
Contact Person: Lee